================================================================================
                                样例使用说明
                             Sample Description
================================================================================
功能描述：
此样例演示了lpsleep模式下，GPIO外部中断唤醒功能。

Function descriptions:
This sample demonstrates the GPIO external interrupt wake-up feature in lpsleep mode.
================================================================================
测试环境：
测试用板：PY32T092_STK
MDK版本： 5.28
IAR版本： 9.20
GCC版本：GNU Arm Embedded Toolchain 10.3-2021.10

Test environment:
Test board: PY32T092_STK
MDK Version: 5.28
IAR Version: 9.20
GCC Version: GNU Arm Embedded Toolchain 10.3-2021.10
================================================================================
使用步骤：
1. 编译下载程序到MCU，并运行；
2. LED灯亮，按下按键，LED灯灭，进入lpsleep模式；
3. 在PA06上产生一个下降沿，程序退出lpsleep模式；
4. LED以500ms的间隔进行翻转。

Example execution steps:
1. Compile and download the program to the MCU and run it;
2. The LED will be on initially. Press the button, and the LED will turn off, 
entering lpsleep mode;
3. Generate a falling edge on PA06, and the program will exit lpsleep mode;
4. The LED will toggle at intervals of 500ms.
================================================================================
注意事项：

Notes:

================================================================================